Throughput
Every extra minute per vehicle reduces the number of vehicles a bay can serve in a day.
INDUSTRY SOLUTION · CAR WASH SYSTEMS
Pressure that keeps the wash bay moving.
PRIME triplex plunger pumps give car wash operators steady pressure, repeatable cycles and a manufacturer-backed spares pathway, so the bay earns more and waits less.
- Commercial car wash bays
- Detailing studios
- Mobile wash operators
- Petrol-station wash points
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE CAR WASH SYSTEMS OPPORTUNITY
A wash business lives or dies on cycle time and uptime.
Car wash operators repeat the same cleaning task all day. The equipment has to hold pressure through long duty, stay quiet enough for customers and come back to service quickly when a part wears.
Consistent results
Pressure that rises and falls produces uneven cleaning and repeat passes.
Water & power cost
Water and electricity are running costs on every wash, so waste adds up quickly.
Downtime
A pump waiting for a part means a bay that is not earning.
02APPLICATION PORTFOLIO
Where PRIME pressure works in a car wash.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 Bar
Pre-wash rinse
Loosen mud and surface dirt before detergent or contact washing.
02150 or 250 Bar
Wheel & arch cleaning
Drive pressure into wheel arches and brake-dust areas.
03250 Bar
Underbody wash
Clear caked mud and road salt-type residue from chassis areas.
04150 Bar
Final high-pressure rinse
A clean, even rinse that leaves the vehicle ready for drying.
05150 or 250 Bar
Bay & floor wash-down
Keep the wash bay itself clean and safe between vehicles.
06250 Bar
SUV & commercial vehicle wash
Larger vehicles with heavier soil need more working pressure.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
Built for repeated, all-day duty.
A wash bay asks the same pump to start, load and unload hundreds of times a day. PRIME's triplex plunger platform and engineered materials are chosen for that kind of repeated duty.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Consistent delivery
Triplex plunger operation supports steadier delivery cycle after cycle.
Serviceable design
Wear parts such as seals and plungers are available as manufactured spares.
Right-sized options
Choose 150 Bar or 250 Bar by the heaviest job in the bay, not the average one.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
A repeatable cycle protects both quality and speed.
METHOD 01
Standard car cycle
A fixed order of work that any operator can repeat.
- 1Pre-rinse roof to sills to loosen dirt
- 2Wheels and arches with a targeted pass
- 3Contact wash or detergent step as per your process
- 4Final rinse top to bottom and hand over for drying
METHOD 02
Heavy-soil cycle
For SUVs, taxis and vehicles arriving with mud.
- 1Longer pre-rinse at working distance
- 2Higher-pressure pass on arches and underbody
- 3Re-check problem areas
- 4Final rinse
METHOD 03
Mobile wash setup
Compact, quick-to-deploy washing for on-site service.
- 1Position the pump close to the water source and power
- 2Lay out hose and lance to avoid kinks
- 3Run the standard cycle
- 4Coil hose and secure accessories
METHOD 04
End-of-day bay clean
Keep the bay in shape for the next morning.
- 1Clear debris from drains
- 2Pressure-wash floor and walls
- 3Rinse equipment surfaces
- 4Log operating hours for maintenance planning
05RECOMMENDED PRIME SOLUTIONS FOR CAR WASH SYSTEMS
Two core platforms. Choose by application.
Match the platform to the heaviest regular job.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR CAR WASH SYSTEMSStandard passenger-car wash bays
A dependable choice for routine car washing and finishing rinses.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR CAR WASH SYSTEMSHigh-volume bays, SUVs and heavy soil
More pressure headroom for underbody work and commercial vehicles.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Measure the bay before and after. These are the four numbers worth tracking.
Shorter cycles
Steady pressure and a fixed method can reduce repeat passes, which gives back minutes on every vehicle.
TRACKMinutes per vehicle
Metered usage
Time a cycle and note the flow to see litres used per wash.
TRACKLitres per wash
Run the right motor
Select the platform for the real duty to avoid running more motor than the job needs.
TRACKkWh per operating hour
Compact bay layout
Plan pump position and hose reach so the bay stays clear for vehicles.
TRACKBay footprint
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep every bay earning.
In a wash business, downtime is lost revenue. Genuine spares and a clear support pathway keep the pump working through the season.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Supply the wash business next door.
Car wash is a repeat-purchase market: new bays open, existing bays upgrade and every pump needs spares. PRIME gives dealers a product range to sell and parts to keep selling.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become the local PRIME dealer.
Serve wash bays, detailing studios and mobile operators with pumps, accessories and genuine spares.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Plan your wash bay.
Share your bay count, vehicle mix and daily volume. PRIME will help you choose the right platform.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Car wash bay · Detailing studio · Mobile wash · Petrol-station wash point
