Turnaround time
Sheds must be cleaned, dried and re-stocked on a schedule, so every hour counts.
INDUSTRY SOLUTION · POULTRY & LIVESTOCK
Hygiene starts with a thorough wash-down.
PRIME triplex plunger pumps help poultry and livestock operations clean sheds, pens, equipment and vehicles between batches, with spares and support from the manufacturer.
- Poultry farms
- Dairy & cattle units
- Hatcheries
- Feed & livestock transport
150 BAR5 HP platform
250 BAR7.5 HP platform
15 LPM*Reference flow
IN-HOUSESpare parts support
01THE POULTRY & LIVESTOCK OPPORTUNITY
Between batches, cleaning is the job that protects the next one.
Livestock facilities need thorough wash-down within a short turnaround window. Manure, dust and organic residue must be removed from floors, walls and equipment without wasting water or labour.
Organic residue
Manure and dried litter cling to floors, feeders and walls.
Water & labour
Large sheds mean large cleaning areas and many labour hours.
Rugged environment
Dust, moisture and rough handling demand robust equipment.
02APPLICATION PORTFOLIO
Where PRIME pressure is used on a livestock site.
Each application below shows the PRIME platform that is the natural starting point. Final selection is confirmed against your actual duty.
01150 or 250 Bar
Poultry shed wash-down
Clean floors, walls and ceilings between batches.
02150 or 250 Bar
Cattle & dairy housing
Wash stalls, alleys and milking-area surroundings.
03150 Bar
Feeders & drinkers
Clean equipment that touches feed and water.
04150 Bar
Vehicle & crate washing
Wash transport vehicles, crates and cages.
05150 Bar
Hatchery & egg-room surroundings
Routine hygiene cleaning of floors and non-sensitive surfaces.
06250 Bar
Drains & manure channels
Flush and clear channels and drainage points.
Application not listed? PRIME can engage around your pressure, flow, power and installation requirement.
Talk to engineering→03WHY PRIME HIGH PRESSURE TRIPLEX PLUNGER PUMPS
Rugged pressure for demanding farm hygiene.
Farm environments are wet, dusty and tough on equipment. PRIME pumps combine corrosion-resistant forged brass heads with serviceable, manufacturer-backed parts.
CRANKCASEPressure Die-Cast Aluminium Alloy
PUMP HEADBrass Forged
CONNECTING RODSZinc-Aluminium Alloy
PLUNGERSHigh-Grade Ceramic
Triplex plunger architecture
Three plungers deliver smoother, more continuous pressure than single-plunger designs, which suits repeated, long-duty cleaning.
Engineered materials
Pressure die-cast aluminium crankcase, forged brass pump head, zinc-aluminium connecting rods and high-grade ceramic plungers.
100% CNC-machined components
Precision machining at PRIME's own facility supports consistency from one pump to the next.
Premium sealing
Nitrile seals as standard, with Viton available for high-temperature conditions.
Low-noise operation
Designed for smoother, quieter running, which matters in workshops, plants and enclosed spaces.
Electric and IC-engine options
Single or three-phase electric drive and IC-engine options, so the pump can follow the site, not the other way round.
Corrosion-resistant head
Forged brass pump head for long service life in wet environments.
Easy to keep running
In-house spares and manufacturer support reduce waiting time.
Drive options
Electric and IC-engine options suit sites with different power availability.
04PRIME PRESSURE APPLICATION METHODS
From requirement to a repeatable cleaning workflow.
Soak, strip, rinse and verify: a defined order cuts repeat work.
METHOD 01
Batch turnaround wash
A complete shed clean between flocks or herds.
- 1Remove equipment and loose litter
- 2Top-down pass on ceilings, walls and fixtures
- 3Floor pass toward the drainage point
- 4Rinse, dry and inspect before restocking
METHOD 02
Equipment wash station
Dedicated clean-down of feeders, drinkers and tools.
- 1Collect equipment at the wash area
- 2Pressure-wash all surfaces
- 3Rinse and drain
- 4Dry and return to the shed
METHOD 03
Vehicle & crate wash
Biosecurity-minded cleaning of vehicles and containers.
- 1Remove bulk material
- 2Pressure-wash exterior, wheels and cargo area
- 3Rinse crates and cages
- 4Check and record
METHOD 04
Drain and channel flush
Keep manure channels flowing.
- 1Loosen compacted material
- 2Higher-pressure pass along the channel
- 3Continuous rinse
- 4Confirm free drainage
05RECOMMENDED PRIME SOLUTIONS FOR POULTRY & LIVESTOCK
Two core platforms. Choose by application.
Choose by shed size and how heavy the residue is.
01 / 02
CORE PRESSURE PLATFORM
150 Bar / 5 HP
BEST SUITED FOR POULTRY & LIVESTOCKRoutine shed and equipment wash-down
Suited to regular cleaning of sheds, feeders, crates and vehicles.
- Pressure
- 150 Bar
- Motor
- 5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
02 / 02
HIGHER PRESSURE PLATFORM
250 Bar / 7.5 HP
BEST SUITED FOR POULTRY & LIVESTOCKHeavy residue, large sheds and channels
For dried residue and large-area work where more pressure shortens the job.
- Pressure
- 250 Bar
- Motor
- 7.5 HP
- Flow
- 15 LPM*
- Drive
- Electric / IC
*15 LPM is a catalogue reference. Confirm exact model configuration, pressure, flow and duty before ordering.
06HOW PRIME SAVES TIME & RESOURCES
What changes in your operation?
Farm margins are tight. Track these four measures to see the difference.
Shorter turnaround
Effective pressure reduces repeat passes, which helps sheds return to service sooner.
TRACKHours per shed wash
Fewer scrubbing hours
Pressure removes residue that otherwise needs manual scraping and brushing.
TRACKLabour-hours per batch
Targeted use
A defined method keeps water use proportionate to the area cleaned.
TRACKLitres per shed
Match motor to site
Electric or IC-engine options let the pump fit the available power.
TRACKkWh or fuel per wash
MEASURE BEFORECONFIGURE WITH PRIMEMEASURE AFTER
BASELINE CALCULATOR
Put numbers on your own operation.
Enter your current figures and test an improvement target. The results are based only on what you enter. They are an illustration, not a PRIME guarantee.
CURRENT · HOURS / MONTH0
CURRENT · LITRES / MONTH0
HOURS REGAINED / MONTH0
LITRES REGAINED / MONTH0
07SPARE PARTS & COMPLETE-CYCLE SUPPORT
Keep the wash-down equipment working through every batch.
A pump that fails mid-turnaround costs days. PRIME supports farm users with genuine spares and a clear route to technical help.
- Genuine spare-part pathway for PRIME pump platforms
- Unloader valves and pressure components
- Hoses, trigger guns, lances and accessories
- Application and maintenance support from the manufacturer
PRIME · COMPLETE CYCLEPUMP · VALVE · SPARE · SUPPORT
- 01
Select
Match pressure, flow and duty to the application.
- 02
Supply
Pump platform, valves and accessories from one manufacturer.
- 03
Maintain
Genuine spare parts, matched to the pump.
- 04
Support
Application and maintenance guidance after delivery.
08DEALERSHIP OPPORTUNITY
Serve the agri-business belt.
Poultry and dairy clusters need dependable wash equipment close to home. PRIME gives dealers products with a built-in spares and service relationship.
PRIMEPARTNER
NETWORKENGINEERED IN INDIA
NETWORKENGINEERED IN INDIA
Become the regional PRIME dealer.
Work with poultry integrators, dairy cooperatives, farm suppliers and equipment retailers.
- Product portfolio: 150 Bar and 250 Bar triplex plunger platforms, valves and accessories
- Recurring business through genuine spares and service support
- Manufacturer-led engineering and product knowledge
- Territory-based enquiry routing
Plan your shed wash system.
Share shed size, batch frequency and power availability. PRIME will recommend a platform.
09
NEXT STEP
Specify the application.
We’ll engineer the pressure solution.
Poultry farm · Dairy & cattle unit · Hatchery · Livestock transport
